Gas Cylinder Trolley - CTS01
This new design solves all the problems associated with the old 2 and 4 wheel cylinder trolleys used for the manual handling of gas cylinders and canisters.
The operator simply pushes the cylinder forward slightly, and then pushes the trolley to the cylinder. This is done very easily because the trolley has two small front wheels that allow the trolley to move forward even when the trolley is vertical.
The operator then pulls back on the cylinder until the trolley is on all 4 wheels. The effort required to do this is only 15kg. The operator can then fix the safety chain around the cylinder. The trolley can then be wheeled around. The operator does not have to support the load at all. If the operator wants to climb a kerb with the trolley they simply push back on the handles to raise the front wheels.
The STS cylinder trolley has been well received in medical and university laboratories, where the safe handling of gas and high pressure cylinders is desired.
. Effortlessly move cylinders around the workplace
. Negotiates single steps and lips within handling regulations
. ATEX Compliant option
CTS01 - Technical Specification
Max SWL 150kg
Max Input Load 15kg
Max Cylinder Height 1370mm
Max Cylinder Diameter 250mm
Min Cylinder Diameter 190mm
Overall Width 380mm
“We have found the trolleys to be exceptionally easy to use - beforehand two people were required to move a cylinder, open doors etc, now it’s a one person operation - especially good for female staff so I can highly recommend them.” – University lab technician |
