STE01-RRH02 - Roll Lifter with Loadcells
Roll Lifter with Loadcells
This system was designed for handling and filling large gas cylinders but can also be adapted for handling large rolls and reels. The unit is completely mobile so that the operator can wheel the unit to the pallet of cylinders or rolls and line up the bottom plate with the pallet. The load can then be rolled onto the bottom plate of the unit. The operator can then power close the clamp to secure the load and wheel the unit around.
The system is able to rotate the load through 360 degrees. We have also designed in an agitation device, which is hydraulically driven, allowing it to rotate left and right continuously.
The filling system is fitted with a digital load cell array, these accurately measure the cylinder as it is filled. It is important that the unit is used on flat ground to ensure the accuracy of the weighing system.
The clamping pads that grip the load are lined with a synthetic rubber material that is able to grip even if it is wet. This is important because the load may become wet if it rains or if condensation forms.
Technical Specifications
- SWL 300kg
- 1500mm battery hydraulic lift
- 1998mm fixed mast height
- Polycarbonate shatterproof clear guarding
- Parallelogramed clamping head with rubber lined clamping pads
- Power clamp controls with adjustable speed
- Clamp pressure monitoring gauge
- 24 volt hydraulic power lift pack
- Steel construction
- Grit blasted and double powder coated