Made in the UK

  1. Home
  2. Products
  3. ATEX Stacker Trucks
  4. ATEX Power Drive Stacker Truck

ATEX Power Drive Stacker Truck

STP12-FAC01-1300kg-Ex

Explore our Fully Powered Stacker Truck with cutting-edge air motor drive system, engineered for effortless lifting of pallets and IBCs. This unit will enhance productivity in pallet and IBC lifting operations. This forked stacker is for use in ATEX zones 1, 2, 21 and 22 areas.

Watch training video
ATEX Power Drive Forked Stacker suitable for use within a zoned environment. ATEX Rated Pneumatic Stacker holding a full IBC at height for decanting. Ex Rated Forked stacker suitable for use with 1300kg IBC's.

STP12-FAC01-1300kg-Ex

Explore our Fully Powered Stacker Truck with cutting-edge air motor drive system, engineered for effortless lifting of pallets and IBCs. This unit will enhance productivity in pallet and IBC lifting operations. This forked stacker is for use in ATEX zones 1, 2, 21 and 22 areas.

Watch training video

Key product features

Pneumatic drive system with control tiller

A man in blue overalls operating a a power drive system on a forked stacker truck.

Pneumatic drive system with control tiller

Our ground-breaking air-driven system allows operators to effortlessly move pallets and IBCs. The ergonomic tiller handle grants exceptional control and maneuverability, while push-button controls provide precise forward and backward movement, ideal for exact load positioning.


The tiller boasts a self-righting gas ram and essential safety components, including an emergency stop button and pedestrian warning horn, ensuring both efficiency and operator well-being.

Stainless steel clad forks

A close up image of the stainless steel clad forks on the pneumatic power drive forked stacker.

Stainless steel clad forks

Expert welders fabricate our forks with 304-grade stainless steel cladding. This stainless steel surface minimises the potential for thermic strike incidents by eliminating sparks or ignition sources. The forks offer exceptional strength and durability, while the adaptable width facilitates the handling of a diverse range of loads.

Heavy-duty construction

Operator uses a power drive system on the forked stacker to move the unit within a warehouse.

Heavy-duty construction

STS units exhibit remarkable strength, robustness, and exceptional durability. Throughout the equipment design process, our engineers meticulously conduct FEA stress analysis on pivotal load-bearing components, guaranteeing an optimal level of strength. Materials are chosen carefully, prioritising suitability and longevity above all else. 



For this ATEX straddle stacker, hot-rolled steel profiles and quality carriage bearings are integrated to ensure secure load lifting. Furthermore, every ATEX IBC/pallet lifter is furnished with a load test certificate and a EU Declaration of Conformity.

ATEX / UKEX certified for gas and dust zones 1, 2, 21, and 22

Ex Rated power drive forked stacker suitable for moving pallets and IBCs in a zoned environment.

ATEX / UKEX certified for gas and dust zones 1, 2, 21, and 22

Central to the STS product range is our ATEX / UKEX equipment selection. Our expertise extends to offering explosion-proof straddle stackers designed for operation within hazardous zones. Each unit is manufactured to ensure electrical continuity throughout. Included with every ATEX straddle stacker is a Declaration of Conformity, serving as tangible proof of alignment with regulatory directives as well as other pertinent standards.

Specification

STP12-FAC01-1300kg-Ex ATEX Power Drive Stacker Truck

  • Safe working load (SWL)

    1300kg (600mm load centre)

  • Functions

    Powered lift/lower, powered drive system with tiller steering

  • Power details

    Air powered, requires min: 400L/min, optimum: 760L/min at 6 bar with 13mm flexible air hose

  • Controls

    Pneumatic buttons, tiller drive system, horn, and emergency stop

  • Pneumatic drive specification

    Speed of travel 0.52m/s maximum based on a 6 bar air supply with 760L of flow, speed adjustment control on rear panel

  • Lift height

    1460mm +/- 30mm (top of forks)

  • Fork specification

    Stainless steel cladded 1200mm long forks with adjustable width

  • Construction

    Mild steel construction

  • Metal preparation and surface finish

    Grit blasted mild steel, primer and polyester powder coated

  • Powder coat colour

    RAL 5010 (blue)

  • Guarding

    Anti-static shatterproof polycarbonate guarding

  • Leg dimensions

    Inside straddle width 1250mm, total outside width 1500mm

  • Front wheels

    Two narrow fixed 150mm nylon wheels with ATEX features

  • Rear wheels

    Two tiller steered 160mm nylon wheels with ATEX features

  • Noise

    Less than 76 dBA

  • ‘Ex’ features

    Yes

  • Compliance

    CE / UKCA

    ATEX / UKEX (zones 1, 2, 21 and 22)

  • Warranty

    2-year warranty, lifetime technical product support

Optional features

Electric-hydraulic lift

For safe area applications we adapt an STP12 (pneumatic unit) into an STE12 (electric unit). On-board batteries then power the hydraulic lifting and driving functions.

Variable leg dimensions

When machinery integration is critical we will modify leg dimensions to suit your facility.

Telescopic/variable lift height

Single- and dual-mast models are available, depending on the lift height required. Single masts offer around 1450mm lift whereas telescopic masts offer 2450mm.

Sale or return

In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.

ATEX Power Drive Forked Stacker (STP12-FAC01-1300kg-EX)
Play Video

Technical specification

See the full technical specification for our ATEX Power Drive Stacker Truck for details such as weight, dimensions and load capacity.

Instruction manual

View the instruction manual for our ATEX Power Drive Stacker Truck, which details how to safely operate and maintain the unit.

Contact Us

If you need a custom manual handling solution, we can design and manufacture the right piece of equipment to meet your specific requirements. Talk to us to find out how we can help you.

ATEX Pedestrian Stacker Trucks

Whatever your industry or application, we can design and manufacture pedestrian stacker trucks customised to suit your requirements.