Made in the UK

  1. Home
  2. Products
  3. ATEX Stacker Trucks
  4. ATEX Telescopic Stacker with Weighing System

ATEX Telescopic Stacker with Weighing System

STP08-FAC01-HDLC-Ex

The ATEX / UKEX telescopic pedestrian stacker truck is ideal for applications where lift heights need to be maximised. Lifting up to 2.76 metres, this 'Ex' rated stacker truck makes a great addition to any tall lift operation in a zoned area. This model is a direct alternative to an ATEX / UKEX forklift truck, the unit is suitable for use in zones 1, 2, 21 and 22.​

Watch training video
Telescopic stacker truck holding weight at height Operator moves an IBC with an Ex telescopic forked stacker. Operator places an IBC on the floor with an ATEX Telescopic Stacker with Weighing System Operator lifts a pallet of drums with this Ex stacker truck

STP08-FAC01-HDLC-Ex

The ATEX / UKEX telescopic pedestrian stacker truck is ideal for applications where lift heights need to be maximised. Lifting up to 2.76 metres, this 'Ex' rated stacker truck makes a great addition to any tall lift operation in a zoned area. This model is a direct alternative to an ATEX / UKEX forklift truck, the unit is suitable for use in zones 1, 2, 21 and 22.​

Watch training video

Key product features

Fully compliant lift system

Operation panel on the ATEX and UKEX  telescopic stacker with buttons for lift and lower

Fully compliant lift system

Our pneumatic system requires a minimal amount of maintenance during the life of the unit; powered by a plug-in airline connection a pneumatic-hydraulic pump supplies oil to the lifting system to enable operators to use the powered lift/lower functions.


Our highly-experienced engineers install mandatory safety features such as emergency stops and blocking valves; should the airline be disconnected, the forks will remain locked in place and the load will remain in position. The 'Ex' pneumatic lift system is much simpler and cheaper to maintain than an equivalent electric ATEX / UKEX forklift truck.

ATEX-certified for gas and dust zones 1, 2, 21, and 22

ATEX and UKEX telescopic stacker with weigh scale shown with forks raised

ATEX-certified for gas and dust zones 1, 2, 21, and 22

We design and manufacture the most-robust pneumatic ATEX and UKEX handling equipment on the market. Having assisted numerous companies to handle flammable materials, we fully understand the wide range of different applications and can offer an 'Ex' rated lifter to suit your exact requirements.


Our pneumatic-hydraulic 'Ex' stackers can be supplied ATEX / UKEX compliant, suitable for use in Zone 1, 2, 21, and 22 environments. We ensure each of our stacker trucks has electrical continuity; a path to ground is always present. With each 'Ex' model we supply a manufacturer’s Declaration of Conformity which states compliance with the directives and relevant British and ISO Standards.

ATEX load cell weigh scale

Heavy duty ATEX and UKEX load cell weigh scale showing weight of an IBC

ATEX load cell weigh scale

This model integrates a heavy-duty weigh scale system for measuring the weight of pallets or IBCs when lifted. A load cell carriage is used to measure the weight of the load. The zoned load cell carriage is designed to be very robust for use in industrial environments. The ATEX display is mounted on the head assembly and includes weighing features such as zero, tare, etc. The weigh scale system has an accuracy of +/- 1.25kg.

Stainless steel clad forks

Stainless steel clad forks suitable for lifting loads

Stainless steel clad forks

Our 'Ex' stacker truck forks are clad in stainless steel to reduce the risk of spark generation should the forks ever come into contact with the ground. Manufactured in the UK, the forks are fabricated to a high standard to ensure they last a long time even when used in harsh work environments.

Hot-rolled lifting channels

ATEX and UKEX telescopic stacker truck weighs a load at full height

Hot-rolled lifting channels

Using only the highest-quality steel from trusted suppliers, our heavy-duty hot-rolled lifting channels ensure the unit remains stable when lifting up to heights of 2765mm. Each unit is tested on-site with static and dynamic loads according to industry standards to ensure full compliance. Units are supplied with load test certificates and are CE- and UKCA-marked.

Controllable rear-wheel steering

Rear wheels on an ATEX Telescopic Stacker with Weighing System

Controllable rear-wheel steering

To give operators maximum directional control when moving heavy pallets or IBCs, ackermann rear-wheel steering is provided on all our 'Ex' forked stackers. Low rolling resistance wheels are fitted to ensure movement of heavy loads is both safe and easy. Furthermore, units are fitted with park brakes to keep the unit stationary when not in use. For applications where space is an issue, we can provide custom leg configurations to suit, including CAD approval drawings.

Specification

STP08-FAC01-HDLC-Ex ATEX / UKEX Telescopic Pedestrian Stacker Truck with Weighing System

  • Safe working load (SWL)

    1200kg (600mm load centre)

  • Functions

    Powered lift/lower, manual push/pull

  • Power details

    Air powered - requires min: 400L/min, optimum: 760L/min at 6 bar with 13mm flexible air hose

  • Controls

    Silicone booted buttons, emergency stop

  • Lift height

    Telescopic, 2740mm +/- 30mm (top of forks)

  • Load Cell Weigh Scale

    Heavy duty ATEX load cell weigh scale with an accuracy of +/- 1.25kg

  • Fork specification

    Stainless steel cladded 1200mm long forks with adjustable width

  • Construction

    Mild steel construction

  • Metal preparation and surface finish

    Grit blasted mild steel, primer and polyester powder coated

  • Powder coat colour

    RAL 5010 (blue)

  • Guarding

    Anti-static shatterproof polycarbonate guarding

  • Leg dimensions

    Inside straddle width 1250mm, total outside width 1480mm

  • Front wheels

    150mm diameter hard nylon wheels with ATEX features

  • Rear wheels

    Two tiller-steered 160mm wheels, aluminium centred with anti-static polyurethane tyres

  • Noise

    Less than 76 dBA

  • Compliance

    CE / UKCA
    ATEX / UKEX (zones 1 & 2)

Optional features

Electric-hydraulic lift

For safe area applications we adapt an STP08 (pneumatic unit) into an STE08 (electric unit). On-board batteries then power the hydraulic lift function.

Power-drive system

When moving goods over long distances we suggest adding power drive. Our power-drive tiller steering offers effortless control, with battery and pneumatic options.

Variable leg dimensions

When machinery integration is critical we will modify leg dimensions to suit your facility.

Sale or return

In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.

ATEX Telescopic Forked Stacker with Load Cells (STP08-FAC01-HDLC-Ex)
Play Video

Technical specification

See the full technical specification for our ATEX Telescopic Stacker with Weighing System for details such as weight, dimensions and load capacity.

Instruction manual

View the instruction manual for our ATEX Telescopic Stacker with Weighing System, which details how to safely operate and maintain the unit.

Contact Us

If you need a custom manual handling solution, we can design and manufacture the right piece of equipment to meet your specific requirements. Talk to us to find out how we can help you.

ATEX Pedestrian Stacker Trucks

Whatever your industry or application, we can design and manufacture pedestrian stacker trucks customised to suit your requirements.