Made in the UK
  1. Home
  2. Products
  3. ATEX Stacker Trucks
  4. ATEX Telescopic Pedestrian Stacker Truck

ATEX Telescopic Pedestrian Stacker Truck

STP08-FAC01-Ex

The ATEX telescopic pedestrian stacker is ideal for applications where height can be a restriction to completing the job. Lifting up to 2.4 metres the forked stacker makes a great addition to any tall lift operation in an ATEX area. This model is a direct alternative to an ATEX forklift truck, the unit is suitable for use in zones 1, 2, 21 and 22.​

Watch training video
Atex Forked stacker truck holding a pallet of drums Use the ATEX forked stacker to load and unload pallets of drums or IBC's Pedestrian forked stacker trucks can be used to load and unload pallets of drums at height Cladded Forks on the ATEX Telescopic Forked Stacker

STP08-FAC01-Ex

The ATEX telescopic pedestrian stacker is ideal for applications where height can be a restriction to completing the job. Lifting up to 2.4 metres the forked stacker makes a great addition to any tall lift operation in an ATEX area. This model is a direct alternative to an ATEX forklift truck, the unit is suitable for use in zones 1, 2, 21 and 22.​

Watch training video

Key product features

Fully compliant lift system

ATEX fully compliant lift systems of the ATEX forked stacker

Fully compliant lift system

Our pneumatic system requires minimal maintenance during the life of the unit; powered by a plug in airline connection a pneumatic-hydraulic pump supplies oil to the lifting system to enable operators to use the powered functions.


Our qualified engineers install mandatory safety features such as emergency stops and blocking valves; should the airline be disconnected, the forks will remain in place and the load will remain in position. The ATEX lift system is much simpler to maintain and use than an ATEX forklift truck.


ATEX-certified for gas and dust zones 1, 2, 21 and 22

ATEX certified for gas and dust zones 1,2, 21 and 22 (optional)

ATEX-certified for gas and dust zones 1, 2, 21 and 22

STS design and manufacture the best ATEX lifting equipment on the market. Having assisted numerous companies which handle flammable materials we understand different applications and can offer an ATEX lifter to suit your requirements.


Our pneumatic-hydraulic forked stackers can be supplied ATEX-compliant, suitable for use in Zone 1, 2, 21 and 22 environments. We ensure each of our stacker trucks has electrical continuity; a path to ground is always present. With each ATEX model we supply a manufacturer’s EU Declaration of Conformity which states compliance with the ATEX Directive 2014/34/EU.

Stainless steel clad forks

Stainless steel cladded fork on the telescopic fork stacker suitable for drums and IBC'S

Stainless steel clad forks

Our stacker forks are clad in stainless steel to reduce the risk of spark generation should the forks ever come into contact with the ground. Manufactured in the UK the forks are fabricated to a high standard to ensure they last a long time even when used in harsh work environments.

Hot-rolled lifting channels

Telescopic Forked Stacker lifted to height, suitable for lifting pallets of drums to height.

Hot-rolled lifting channels

Using only the best quality steel from trusted suppliers our heavy-duty hot-rolled lifting channels ensure the unit remains stable when lifting up to heights of 2450mm. Each unit is tested on site with static and dynamic loads according to industry standards to ensure full compliance. Units are supplied with load test certificates and are CE marked.

Controllable rear-wheel steering

Ackermann rear-wheel steering gives you maximum directional control when lifting pallets and IBCs.

Controllable rear-wheel steering

To give operators maximum directional control when moving heavy pallets or IBCs ackermann rear-wheel steering is provided on all our forked stackers. Low rolling resistance wheels are fitted with precision sealed bearings. Furthermore units are fitted with park brakes to keep the unit stationary when not in use. For applications where space is a issue we can provide custom leg configurations to suit.

Optional features

Electric-hydraulic lift

For non-ATEX applications we adapt an STP08 (pneumatic unit) into an STE08 (electric unit). On-board batteries then power the hydraulic lift function.

Power-drive system

When moving goods over long distances we suggest adding power drive. Our power-drive tiller steering offers effortless control, with battery and pneumatic options.

Load cell weighing system

We can provide these units with an ATEX weigh scale system. Measure accurately the weight of pallets and IBCs using this model.

Variable leg dimensions

When machinery integration is critical we will modify leg dimensions to suit your facility.

Sale or return

In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.

ATEX Certified Heavy-Duty Telescopic Pedestrian Stacker (Model: STP08-FAC01-Ex)
Play Video

Technical specification

See the full technical specification for our ATEX Telescopic Pedestrian Stacker Truck for details such as weight, dimensions and load capacity.
view pdf

Instruction manual

View the instruction manual for our ATEX Telescopic Pedestrian Stacker Truck, which details how to safely operate and maintain the unit.
view pdf

Contact Us

If you need a custom manual handling solution, we can design and manufacture the right piece of equipment to meet your specific requirements. Talk to us to find out how we can help you.

Get in touch

ATEX Pedestrian Stacker Trucks

Whatever your industry or application, we can design and manufacture pedestrian stacker trucks customised to suit your requirements.

View our Stackers