This model has been designed to be both small and compact - the legs play a big role in this. The under-pallet legs shown are compatible with Euro pallets that have an opening on the 800mm side, the legs are also suitable for loading onto bunds, platforms and conveyors whereby there is a gap underneath. The low-level leg design does not allow drums to be placed directly onto the floor; if this is a requirement we are able to offer a straddle leg design to allow the placement of drums on the floor.
Key product features
Unique leg design
Unique leg design
Universal drum catch
Universal drum catch
Our unique drum gripping catch mechanism effortlessly connects to a wide range of drum types and sizes; drums from 50-220 litres can be lifted using this catch. The adjustment of the top hook is simple and easy and caters for drums with different lip designs. To adjust the catch operators remove a locking pin, adjust the top hook position (forward or backward) and then refit the pin. The adjustment of the catch takes just seconds to complete.
Stainless-steel ladder rack
Stainless-steel ladder rack
The 304-grade stainless-steel ladder rack at the front of the unit allows the operator to adjust the position of the drum catch up and down to accommodate drums of different heights. Operators simply move the gripping catch lower for shorter drums and higher for taller drums. For a detailed breakdown of the drum heights that are compatible with this product, please see the specification document below.
Manual hydraulic pump
Manual hydraulic pump
The aluminium hydraulic pump supplies oil to a hydraulic lifting ram, the system lifts the drum up when the handle is pumped back and forth. A hand-operated lowering valve mounted on the top of the lifter provides precise control when a drum needs to be lowered down onto a pallet. We assemble all our hydraulic circuits by hand in our UK factory to ensure that each system is both clean and reliable, each system is flushed through and fully tested before dispatch.
Chemical-resistant wheels
Chemical-resistant wheels
The standard model makes use of elasticated rubber tyres fitted to an aluminium hub. The ATEX / UKEX model uses tyres made from an anti-static (or conductive) polyurethane compound, again fitted to an aluminium hub. All wheels use two precision bearings which are fitted within the hub, these offer a low rolling resistance making the unit easy to move around, even when moving a fully-loaded 350-kilogram drum. To get the most out of this unit we recommend you use it on smooth flat surfaces.
Drum suitability
Drum suitability
The DTP06 hydraulic drum lifter can handle a wide variety of drum types and sizes. This is especially useful if your company uses many different types of drums on a daily basis. For a detailed breakdown of the drums with which this product is compatible, please see the drum suitability document below. If the drums you use are not shown in the document, please contact us and we can advise you.
ATEX / UKEX-certified for Zone 1, 2, 21 and 22 (optional)
ATEX / UKEX-certified for Zone 1, 2, 21 and 22 (optional)
For ATEX / UKEX hazardous areas we can supply a fully-certified Euro pallet hydraulic drum lifter for use in zoned areas. The DTP06-Ex has been designed and manufactured for use in gas and dust classified spaces: Zone 1, 2, 21 and 22. The hydraulic drum lifter is constructed to ensure electrical continuity whereby a path to ground is always present. A Declaration of Conformity is supplied which states compliance with the directives and relevant British and ISO Standards.
Specification
DTP06-R500 Euro Pallet Hydraulic Drum Lifter
- Safe working load (SWL)
350kg
- Leg design
Low-level, 315mm internal, maximum width 555mm
- Pallet approach
Designed for lifting from Euro pallets, bunds or conveyors
- Drum compatibility
Steel, plastic and fibreboard drums, 50-220 litres (incl. MAUSER drums)
- Drum gripping catch
Adjustable catch for different drum lips, catch is also height adjustable
- Lift stroke
500mm
- Under-drum clearance
420mm
- Lifting system
Hydraulic 17cc hand-operated pump with lowering valve
- Guarding
Shatterproof clear polycarbonate
- Metal preparation
Grit blasted mild steel, aqua blasted stainless steel parts
- Surface finish
Primer and polyester powder coated mild steel, stainless steel is smooth and clean
- Unit colour
RAL 5010 (blue)
- Front wheel type
Fixed 85mm, precision bearings
- Front wheel material
Aluminium centred, polyurethane tyres
- Rear wheel type
Braked castors 100mm, precision bearings
- Rear wheel material
Aluminium centred, polyurethane tyres
- Compliance
CE / UKCA
DTP06-R500-Ex ATEX / UKEX Euro Pallet Hydraulic Drum Lifter
- Safe working load (SWL)
350kg
- Leg design
Low-level, 315mm internal, maximum width 555mm
- Pallet approach
Designed for lifting from Euro pallets, bunds or conveyors
- Drum compatibility
Steel, plastic and fibreboard drums, 50-220 litres (incl. MAUSER drums)
- Drum gripping catch
Adjustable catch for different drum lips, catch is also height adjustable
- Lift stroke
500mm
- Under-drum clearance
420mm
- Lifting system
Hydraulic 17cc hand-operated pump with lowering valve
- Guarding
Anti-static shatterproof clear polycarbonate
- Metal preparation
Grit blasted mild steel, aqua blasted stainless steel parts
- Surface finish
Primer and polyester powder coated mild steel, stainless steel is smooth and clean
- Unit colour
RAL 5010 (blue)
- Front wheel type
Fixed 85mm, precision bearings
- Front wheel material
Aluminium centred, polyurethane tyres
- Rear wheel type
Braked castors 100mm, precision bearings
- Rear wheel material
Aluminium centred, electrically conductive elastic solid rubber tyres
- Compliance
CE / UKCA
ATEX / UKEX (zones 1, 2, 21, 22)
Optional features
ATEX / UKEX option
We can offer an ATEX / UKEX version of this model, suitable for use in zone 1, 2, 21 and 22 environments.
Stainless-steel model
We offer a stainless steel model with an aqua blasted smooth clean finish suitable for clean good manufacturing practice (GMP) areas.
Tall-lift model
We can provide this unit with a taller lifting ram, allowing you to place drums onto high containment bunds should this be one of your requirements.
Electric Lift
We can offer this lifter with push-button electric-hydraulic lift to make light work of lifting heavy drums.Sale or return
In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.
Technical specification
See the full technical specification for our Euro Pallet Hydraulic Drum Lifter for details such as weight, dimensions and load capacity.
Instruction manual
View the instruction manual for our Euro Pallet Hydraulic Drum Lifter, which details how to safely operate and maintain the unit.
Contact Us
Do you have a manual handling issue we could solve? We’d be happy to discuss any handling concerns and advise on the most suitable STS equipment. You can talk to us via telephone, email and social media.
FAQs
Do you have a question for us? Take a look at our FAQ page for answers to common customer queries.