The unit has a rubber support pad to suit gas bottles with diameters between 180mm to 450mm. The operator secures the cylinder in place against the pad using a ratchet and strap mechanism before lifting and manoeuvring it into position. The rubber pads provide additional grip between the cylinder and support pad ensuring the load is held securely throughout the handling operation. To detach the cylinder the ratchet mechanism is released, this is done by pulling the ratchet lever and rotating the handle forward.
Key product features
Cylinder securing head
Cylinder securing head
Manual hydraulic pump
Manual hydraulic pump
The 17cc aluminium pump supplies oil to a lifting ram in the centre of the unit. The system raises the gas bottle when the rear tiller handle is pumped back and forth. A hand-operated lowering lever/valve is mounted on the top of the lifter body. The lowering lever provides precise control when a gas bottle needs to be lowered down onto the floor. We assemble all our hydraulic circuits by hand in our UK factory to ensure that each system is clean and provides long-term reliability.
ATEX / UKEX-certified model for Zone 1, 2, 21 and 22 (optional)
ATEX / UKEX-certified model for Zone 1, 2, 21 and 22 (optional)
Explosive or potentially explosive atmospheres require operators to use zoned ATEX / UKEX equipment. We provide fully certified gas bottle lifters for use in these hazardous areas if required.
The ATEX / UKEX version is suitable for use in 'Ex' classified spaces: Zone 1, 2, 21 and 22. Electrical continuity - whereby a path to ground is always present – is of key importance when manufacturing ATEX / UKEX-compliant cylinder handling equipment. All our 'Ex' cylinder lifters are supplied with a Declaration of Conformity which states compliance with the directives and relevant British and ISO Standards.
Specification
DTP03-R500-CA10 Gas Cylinder Lifter
-
Safe working load (SWL)
250kg
-
Leg design
500mm internal straddle with 710mm maximum width
-
CA10 securing clamp
Adjustable cylinder securing using a ratchet and strap arrangement for cylinders with diameters of 180mm to 450mm
-
Lift stroke
500mm
-
Lift clearance
450mm
-
Lifting system
Hydraulic 17cc hand-operated pump with lowering valve
-
Guarding
Shatterproof clear polycarbonate
-
Metal preparation
Grit-blasted mild steel, vibro-polished stainless-steel parts
-
Surface finish
Primer and polyester powder coated mild steel, stainless steel is smooth and clean
-
Unit colour
RAL 5010 (blue)
-
Front wheel type
Two fixed 160mm diameter wheels with precision bearings
-
Front wheel material
Aluminium-centred with polyurethane tyres
-
Rear wheel type
Two braked rear castors, 100mm diameter with precision bearings
-
Rear wheel material
Aluminium-centred with polyurethane tyres
-
Compliance
CE / UKCA
DTP03-R500-CA10-Ex ATEX / UKEX Gas Cylinder Lifter
-
Safe working load (SWL)
250kg
-
Leg design
500mm internal straddle with 710mm maximum width
-
CA10 securing clamp
Adjustable cylinder securing using a ratchet and strap arrangement for cylinders with diameters of 180mm to 450mm
-
Lift stroke
500mm
-
Lift clearance
450mm
-
Lifting system
Hydraulic 17cc hand-operated pump with lowering valve
-
Guarding
Anti-static shatterproof clear polycarbonate
-
Metal preparation
Grit-blasted mild steel, vibro-polished stainless-steel parts
-
Surface finish
Primer and polyester powder coated mild steel, stainless steel is smooth and clean
-
Unit colour
RAL 5010 (blue)
-
Front wheel type
Two fixed 160mm diameter wheels with precision bearings
-
Front wheel material
Aluminium-centred with anti-static polyurethane tyres
-
Rear wheel type
Two braked rear castors, 100mm diameter with precision bearings
-
Rear wheel material
Aluminium-centred with anti-static polyurethane tyres
-
Compliance
CE / UKCA
ATEX / UKEX (zones 1, 2, 21, 22)
Optional features
ATEX / UKEX option
We can offer an ATEX / UKEX version of this model, suitable for use in zone 1, 2, 21 and 22 environments.Stainless-steel model
We offer 304-grade stainless steel cylinder lifters, suitable for clean rooms as well as good manufacturing practice (GMP) areas.Tall-lift model
We can provide this unit with a taller lifting ram (up to 760mm lift stroke), allowing you to place cylinders onto high containment bunds.Sale or return
In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.
Technical specification
Contact Us
Do you have a manual handling issue we could solve? We’d be happy to discuss any handling concerns and advise on the most suitable STS equipment. You can talk to us via telephone, email and social media.
FAQs
Do you have a question for us? Take a look at our FAQ page for answers to common customer queries.